When looking for a new home, an initial item many folks consider is the home size. On reviewing properties you will see the property measurement in sq ft or sq m, but you may not know what that number actually measures.
December 2, 2016
How are property measurements calculated in Calgary?
All properties measured for sale in Alberta must follow RMS (Residential Measurements Standard) as outlined by RECA (Real Estate Council Alberta). The current rules of the RMS came into effect in 2016.
The details of the measurement guidelines provided by RECA are very specific so please direct any specific questions to your Realtor or RECA directly.
In a general sense there are some fundamental items to consider.
1. Below grade measurements are not included in the RMS. The 'floor space' measurements for a listing on realtor.ca or other websites are above grade only even if it is a developed walkout or a split level below grade. The basement or below grade measurement is a separate figure.
2. Vaulted areas with no floor such as two storey open to below are excluded from measurements. Minimum ceiling heights are required in areas of sloped roofs and details surround the inclusion/exclusion of bay windows and other cantilevers.
3. Detached homes are measured using the exterior wall at the foundation.
4. Attached properties with a common wall such as half duplexes, villas, townhouses and apartments are measured based on interior walls (paint to paint) at floor level. (This means these properties show smaller than if the same property was detached.)
The most important item to consider is that RMS treats all property of the same type the same. If a property is not measured according to the RMS standard it makes it difficult to compare to other properties.
As always, please feel free to contact me with any questions or for more information regarding the purchase or sale of your home.
Post Your Comment: